OceanHub > Feed > New echo sounder in a single day
Hydrex Belgium
4 months ago

New echo sounder in a single day

Last month our diver/welders installed a new echo sounder and speed log system in the shell plating of a roro vessel during her stop in Eemshaven. Our teams can very quickly install or replace any type of transducer without any hindrance to a ship’s schedule. This was demonstrated when the operation in the Netherlands was concluded in a single day.

The operation started with an inspection of the tank where the echo sounder was to be installed. A small hole was drilled in the shell plating to pinpoint the exact location on the waterside of the hull.


The team then installed a mobdock, constructed at our fast response center, over the designated area. This allowed them to perform work inside the tank without water ingress. A part of the adjacent frame was removed to give our welders a proper working space for the operation.

The area that needed to be cut away was marked on the shell plating and removed. The edges of the opening were then prepared for the installation of the echo sounder base flange which was positioned and secured with a full penetration weld.

Next an independent inspector carried out NDT testing of the weld seams. The system valve was then installed on top of the flange by our team. Finally the cofferdam was removed from the hull, concluding the operation. The combined echo sounder/speed log system was ready for connection to the engine room.

Thread

This post has been shared in your feed.

View Post

Not a member yet? To access you will need to login or signup

OceanHub is the Ocean Space knowledge community, where you can:

  • Increase your ocean knowledge, influence and network
  • Connect with ocean users, groups, brands and much more
  • Have a profile, newsfeed and access to read and post articles
To read articles you will need to
signup or login.
It's totally free!
By signing up, you agree to our terms of service and privacy policy